National Instruments DAQ PCI E Series User Manual page 100

© National Instruments Corporation
Appendix A
Transfer Characteristics
Relative accuracy (INL)
After calibration ...........................±0.3 LSB typ, ±0.5 LSB max
Before calibration.........................±4 LSB max
DNL
After calibration ...........................±0.3 LSB typ, ±1.0 LSB max
Before calibration.........................±3 LSB max
Monotonicity ......................................12 bits, guaranteed after
Offset error
After calibration ...........................±1.0 mV max
Before calibration.........................±200 mV max
Gain error (relative to internal reference)
After calibration ...........................±0.01% of output max
Before calibration.........................±0.5% of output max
Gain error (relative to
external reference) ..............................+0% to +0.5% of output max,
Voltage Output
Ranges ................................................±10 V, 0 to 10 V, ±EXTREF,
Output coupling ..................................DC
Output impedance ...............................0.1
Current drive.......................................±5 mA max
Protection ..........................................Short-circuit to ground
Power-on state ....................................0 V
External reference input
Range ...........................................±11 V
Specifications for PCI-MIO-16E-1, PCI-MIO-16E-4, and PCI-6071E
calibration
not adjustable
0 to EXTREF
(software selectable)
A-7
max
PCI E Series User Manual