National Instruments DAQ PCI E Series User Manual page 107

Appendix A Specifications for PCI-MIO-16XE-10, PCI-6031E, PCI-6032E, and PCI-6033E
PCI E Series User Manual
Input coupling .................................... DC
Max working voltage ......................... Each input should remain
Overvoltage protection ....................... ±25 V powered on,
Inputs protected
PCI-MIO-16XE-10,
PCI-6032E ............................ ACH<0..15>, AISENSE
PCI-6031E, PCI-6033E ......... ACH<0..63>, AISENSE,
FIFO buffer size ................................. 512 samples
Data transfers ..................................... DMA, interrupts,
DMA modes ....................................... Scatter gather
Configuration memory size ................ 512 words
Transfer Characteristics
Relative accuracy ............................... ±0.75 LSB typ, ±1 LSB max
DNL ................................................... ±0.5 LSB typ, ±1 LSB max
No missing codes ............................... 16 bits, guaranteed
Offset error
Pregain error after calibration ...... ±3 µV max
Pregain error before calibration ... ±2.2 mV max
Postgain error after calibration .... ±76 µV max
Postgain error before calibration.. ±102 mV max
Gain error (relative to calibration reference)
After calibration (gain = 1) .......... ±30.5 ppm of reading max
Before calibration ........................ ±2,150 ppm of reading max
With gain error adjusted to 0 at gain = 1
Gain 1....................................... ±200 ppm of reading max
within ±11 V of ground
±15 V powered off
AISENSE2
programmed I/O
A-14 © National Instruments Corporation