National Instruments DAQ PCI E Series User Manual page 151

Index
typical pretriggered acquisition (figure),
4-29
DAQ-STC system timing controller, C-1, C-4
data acquisition timing connections. See DAQ
timing connections.
DGND signal
description (table), 4-4
digital I/O connections, 4-24
PCI-MIO-16E-1, PCI-MIO-16E-4, and
PCI-6071E (table), 4-7
PCI-MIO-16XE-10, PCI-6031E,
PCI-6032E, and PCI-6033E (table), 4-9
PCI-MIO-16XE-50 (table), 4-10
timing I/O connections, 4-27
DIFF (differential) input mode
definition (table), 3-5
description, 4-16
ground-referenced signal sources, 4-17
nonreferenced or floating signal sources,
4-18 to 4-19
questions about, C-2
recommended configuration (figure),
4-15
single-ended connections, 4-20
floating signal sources (RSE), 4-21
grounded signal sources (NRSE),
4-21 to 4-22
when to use, 4-16
digital I/O
operation, 3-17
questions about, C-4 to C-5
signal connections, 4-24 to 4-25
specifications
PCI-MIO-16E-1, PCI-MIO-16E-4,
and PCI-6071E, A-8 to A-9
PCI-MIO-16XE-10, PCI-6031E,
PCI-6032E, and PCI-6033E, A-18
PCI-MIO-16XE-50, A-26 to A-27
digital trigger specifications
PCI-MIO-16E-1, PCI-MIO-16E-4, and
PCI-6071E, A-11
PCI E Series User Manual
PCI-MIO-16XE-10, PCI-6031E,
PCI-6032E, and PCI-6033E, A-20
PCI-MIO-16XE-50, A-27
DIO<0..7> signal
description (table), 4-5
digital I/O connections, 4-24 to 4-25
PCI-MIO-16E-1, PCI-MIO-16E-4, and
PCI-6071E (table), 4-7
PCI-MIO-16XE-10, PCI-6031E,
PCI-6032E, and PCI-6033E (table), 4-9
PCI-MIO-16XE-50 (table), 4-11
dither
enabling, 3-9 to 3-10
signal acquisition effects (figure), 3-10
documentation
conventions used in manual, xii-xiii
National Instruments documentation,
xiii-xiv
organization of manual, xi-xii
related documentation, xiv
dynamic characteristic specifications
analog input
PCI-MIO-16E-1, PCI-MIO-16E-4,
and PCI-6071E, A-4 to A-5
PCI-MIO-16XE-10, PCI-6031E,
PCI-6032E, and PCI-6033E, A-15
to A-16
PCI-MIO-16XE-50, A-24
analog output
PCI-MIO-16E-1, PCI-MIO-16E-4,
and PCI-6071E, A-8
PCI-MIO-16XE-10 and PCI-6031E,
A-17
PCI-MIO-16XE-50, A-26
E
EEPROM storage of calibration constants, 5-1
electronic support services, D-1 to D-2
e-mail support, D-2
environment specifications
I-4 © National Instruments Corporation