National Instruments DAQ PCI E Series User Manual page 122

Optional Cable Connector
Descriptions
© National Instruments Corporation
This appendix describes the connectors on the optional cables for the
PCI E Series boards.
Figure B-1 shows the pin assignments for the 68-pin E Series
connector. This connector is available when you use the SH6868 or
R6868 cable assemblies with the PCI-MIO-16E-1, PCI-MIO-16E-4,
PCI-MIO-16XE-10, PCI-MIO-16XE-50, and PCI-6032E. It is also one
of the two 68-pin connectors available when you use the SH1006868
cable assembly with the PCI-6031E, PCI-6033E, or PCI-6071E.
B-1
Appendix
B
PCI E Series User Manual