Power Wheels Super Talk! BARBIE Sun Jammer Owner's Manual With Assembly Instructions page 30

Battery Connector
Lock Fastener
Opening
6 Volt Battery Installation
Motor Harness
Connector
Canopy Not Shown
Lock Fastener
Canopy Not Shown
Top View
Lock Fastener
Top of Seat
30
4
• Squeeze the tabs on each side
of the motor harness connector.
• Plug the battery connector into
the motor harness connector.
Note: If the battery connector will
not plug into the motor harness
connector, turn it over and try
again! Do not force the battery
connector into the motor harness
connector.
5
• Lower the seat back. Make sure
the tabs on the front of the seat
are inserted into the slots in the
vehicle body.
Note: Make sure that the tabs on
the lock fastener are aligned with
the notches in the lock fastener
opening.
• Push down firmly on the seat
back to snap the seat into the
vehicle body.
6
• Rotate the lock fastener
using a slotted screwdriver to lock
the battery compartment.
• Lift the seat back to make sure
the lock fastener is in the locked
position. Keep the lock fastener in
the locked position at all times to
prevent children from accessing
the batteries.
1 / turn
4