Power Wheels Super Talk! BARBIE Sun Jammer Owner's Manual With Assembly Instructions page 17

16
Grille
Slots
Tabs
Tabs
Assembly
Slots
Bumper Support
Front Bumper
17
13
• Face the front of the vehicle.
• Apply labels to the vehicle body
grille as shown. Make sure the
areas where the labels will be
applied are clean and dry. For
best adhesion, avoid applying
the labels more than once.
14
• Fit the lens tabs on the back of a
headlight lens assembly (assem-
bled in step 12) into the headlight
slots in the grille.
• Press firmly to snap the headlight
lens assembly into the grille.
• Repeat this procedure to snap
the other headlight lens assembly
into the grille.
15
• With the front bumper angled as
shown, insert the tabs on the
front bumper into the slots in the
bumper support.
• Push down on the bumper so it
lays flat on the bumper support.