Power Wheels Super Talk! BARBIE Sun Jammer Owner's Manual With Assembly Instructions page 20

Short Seat Belt Strap
End
T-Loops
Slot
Seat
T-Loop
Fastener End
Assembly
T-Loop (Pull through slot)
Fastener End
Slot
Long Seat Belt Strap
20
22
• Turn the seat upside down.
• Insert the fastener end of a short
seat belt strap through the slot
near the outer edge of the seat.
Make sure the side of the seat
belt with the fastener faces the
outer edge of the seat.
• Pull the short seat belt strap com-
pletely through the slot until the
last T-loop at the opposite end of
the belt catches against the slot.
(You will pull one T-loop through
the slot.)
• Repeat this procedure to
assemble the other short seat
belt strap.
23
• Insert each fastener end of the
long seat belt strap through a slot
in the center of the seat. Make
sure the fasteners face the outer
edge of the seat.
• Pull each side of the long seat
belt strap evenly through the
slots. Make sure to pull each
T-loop through a slot.
• Turn the seat upright.