Sport Bar Support
Long Leg
Sport Bar
Support
Tunnel
Hole
Assembly
Swivel
Swivel
23
28
• Using safety scissors, remove
the sport bar brackets and sport
bar swivels from the plastic
connector. Dispose of the plastic
connector.
• Fit a swivel onto the long leg of a
sport bar support.
• Press the sport bar support firmly
into the swivel.
• Repeat this procedure to
assemble the other sport bar
support.
29
• Fit the sport bar into the holes
in the vehicle body, as shown.
30
• Insert a sport bar support with
swivel (assembled in step 28)
through the tunnel in the rear
corner of the canopy and into
the hole in the vehicle body,
as shown.
• Repeat this procedure to attach
the other sport bar support and
the canopy to the vehicle body.