Power Wheels Super Talk! BARBIE Sun Jammer Owner's Manual With Assembly Instructions page 13

Dash
Telephone Cord
Dash
2
1
Tab
Assembly
1
Tab
Slots
13
• Bend the end of the telephone
• Insert the end of the telephone
• Pull up on the end of the
• Place the telephone in the
Knob Plate
• Position the bottom edge of the
• Snap the top of the knob plate
2
Body
• Fit the tabs on the dash into
• Insert two #10 x 1" screws through
• Insert two #10 x
• Tighten each screw with a Phillips
5
cord so that it forms a "T".
cord through the hole in the
dash, as shown.
telephone cord to be sure it is
secure.
telephone holder with the
number pad facing out.
knob plate in the opening in the
dash.
into the dash.
6
1
#10 x 1" Screw – 2
2
#10 x 1 / " Screw – 2
2
Both Shown Actual Size
the slots in the front of the
vehicle body.
the holes closest to the front of
the vehicle body and into the
vehicle body .
1
1 / '' screws through
2
the holes closest to the seating
area and into the holes in the
vehicle body .
2
screwdriver. Do not over-tighten.