Power Wheels Super Talk! BARBIE Sun Jammer Owner's Manual With Assembly Instructions page 16

Steering Wheel
TM
Wide Tab
Lens Guard
Assembly
Steering Wheel
Cap
Wide Notch
Headlight
Lens
16
11
#8 x 1" Screw – 2
Shown Actual Size
• Align the tab on the steering
wheel cap with the slot in the
center of the steering wheel.
• Fit the steering wheel cap into
the center of the steering wheel.
• Insert two #8 x 1" screws into the
steering wheel cap as shown.
• Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
12
• Fit the wide notch in the side of a
headlight lens under the wide
tab on a lens guard.
• Press firmly on the inside of the
headlight lens to snap it into the
lens guard.
• Repeat this procedure to
assemble the other headlight
lens to the remaining lens guard.