Paper Take-Up Roller; Electrostatic Charger Wire - Oce cm4520 User Manual

Care of the Machine

Paper Take-Up Roller

% Clean the paper take-up
rollers by wiping them
with a soft, dry cloth.
Reminder
Never use solvents, such as benzene or thinner, to clean the paper take-
up roller.

Electrostatic Charger Wire

If the electrostatic charger wire is dirty, streaks will appear though the printed
images. If this occurs, follow the procedure described below to clean the
electrostatic charger wire.
1
Open the machine's front door.
2
Slowly pull out the
charger-cleaning tool as
far as possible. Next,
slowly push in the charg-
er-cleaning tool as much
as possible. Repeat the
above operations three
times.
– Perform this same
operation to clean
each of the other
electrostatic charger
wires.
3
Securely insert each charger-cleaning tool, and then close the front
door.
cm4520
10
10-5