Oce cm4520 User Manual page 79

2
No. Part Name
29 ADF connector
30 Finisher connector
31 Power connector
32 Power connector for the external
image controller
33 Dehumidifier heater power switch
34 Filter 2
35 TEL jack 2
36 LINE jack 2
37 USB port (type B)
USB 2.0/1.1-compliant
38 TEL jack 1
39 LINE jack 1
40 IEEE1284 port (type C)
41 Internal controller port
42 External controller port
43 Network connector
(10 Base-T/100 Base -TX)
44 Filter 1
45 Ozone filter
46 Left-side door
2-10
Before Making Copies
Description
Used for connecting the ADF hookup cord
Used for connecting the finisher hookup cord
Used for connecting the power cord
Used for connecting the power cord for the external
image controller
Used to turn the dehumidifier heater on and off.
Turning on the dehumidifier heater reduces mois-
ture in the paper. This switch is used when the op-
tional dehumidifier heater is installed.
Collects the toner dust generated in the machine
Used for connecting a telephone
Used for connecting a general subscriber line. This
jack is used when the optional fax multi line is in-
stalled.
Used for connecting a USB cable from the compu-
ter
Used for connecting a telephone
Used for connecting the general subscriber line
Used for connecting the parallel cable from the
computer
Used for connecting the internal controller
Used for connecting the cable from the external
controller
Used for connecting the network cable when this
machine is used for network printing and network
scanning
Collects the toner dust generated in the machine
Collects the ozone generated in the machine
Opened when replacing the waste-toner box
cm4520