Adjusting The Print Density (Density Settings) - Oce cm4520 User Manual

3

Adjusting the Print Density (Density Settings)

1
In the Basic screen, touch [Quality/Density].
The Quality/Density screen appears.
2
Touch [Change] under "Density".
The Density screen appears.
3
Select the desired Density setting.
– Each time [Light] or [Dark] is touched, the density is lightened or
darkened by one level.
– To select the center setting (default setting), touch [Std.].
– To cancel changes to the settings, touch [Cancel].
4
Touch [OK].
3-62
Basic Copy Operations
cm4520