Oce cm4520 User Manual page 72

Before Making Copies
No. Part Name
1 Main unit
2 Working Table WT-501
3 Fax Multi Line cm3500220
4 Image Controller 9295
5 Desk 9995
6 Paper Feed Cabinet 9201
7 Paper Feed Cabinet 9237
8 Paper Feed Cabinet 9289
9 Finisher 9238
10 Punch Kit
11 Finisher 9293
12 Job Separator cm3500010
13 Video Interface Kit
cm3500190*
cm4520
Description
The document is scanned by the scanner section,
and the scanned image is printed by the printer
section.
Referred to as the "machine", the "main unit", or
the "cm4520" throughout the manual.
Provides an area to temporarily place a document
or other materials
Installed to increase the telephone lines available
for faxing
External image controller that allows this machine
to be used as both a color printer and a color
scanner configured into a computer network
For details, refer to the manual provided with image
controller 9295.
Allows this machine to be set up on the floor
Referred to as the "desk" throughout the manual.
The top drawer can be loaded with up to 500 sheets
of paper, and the bottom drawer can be used as
storage.
Referred to as the "single paper feed cabinet"
throughout the manual.
Both the top and bottom drawers can each be
loaded with up to 500 sheets of paper.
Referred to as the "double paper feed cabinet"
throughout the manual.
Can be loaded with up to 2,500 sheets of paper
Referred to as the "LCT" throughout the manual.
Feeds out printed pages. The "Offset" setting
(separating), Staple settings (stapling), and "Fold &
Staple" function (binding) are available.
• In order to install the finisher, the main unit must
be installed on the desk, on the LCT, on the
single paper feed cabinet, or on the double
paper feed cabinet.
Allows hole punching to be used if installed onto
finisher 9238
Referred to as the "punch kit" throughout the
manual.
Feeds out printed pages. The "Offset" setting
(separating), Staple settings (stapling), and Punch
settings (hole punching) are available.
• In order to install the finisher, the main unit must
be installed on the desk, on the LCT, on the
single paper feed cabinet, or on the double
paper feed cabinet.
Copy exit tray installed on finisher 9293
Referred to as the "job separator" throughout the
manual.
Used for connecting the image controller 9295 to
this machine
2
2-3