Basic Copy Operations
To select double-sided copies
0 The default setting is "1
0 For details on using the original glass to scan multiple document pages,
refer to "Scanning a Multi-Page Document from the Original Glass" on
page 3-16.
1
In the Basic screen, touch [Simplex/Duplex].
The Simplex/Duplex screen appears.
2
Touch [1
–
Specify the binding direction and the original direction, otherwise
the copies will not be printed as desired.
–
If the binding position for the document is set to "Auto", the position
of the binding margin is automatically selected. A binding margin
along the long side of the paper is selected if the document length
is 11-3/4 inch or less. If the document length is more than 11-3/4
inch, a binding margin along the short side of the paper is selected.
–
If the binding position for the document is set to "Auto", the binding
margin is set at the top or at the left.
–
If the binding position for the copy is set to "Auto", the binding po-
sition is automatically determined according to the orientation of
the loaded document. If the document length is 11-3/4 inch or less,
a binding position along the long side of the paper is selected. If the
document length is more than 11-3/4 inch, a binding position along
the short side of the paper is selected.
cm4520
1".
2] or [2
2].
3
3-55