Oce cm4520 User Manual page 372

Application Functions
– If the document is placed on the original glass, touch [Finish] in the
screen that appears, requesting confirmation that scanning of the
document is finished.
6
Position the next document batch, and then touch [Change Setting].
7
Select the desired copy settings, and then press the [Start] key.
– To print a single copy to be checked, touch [Proof Copy] key.
– Repeat steps 6 and 7 until all document batches have been
scanned. The amount of memory available can be checked beside
"Memory" in the upper-right corner of the screen. In addition, the
number of document batches can be checked beside "Number of
Sep. Scans".
– If not enough space is available in the memory, a message appears.
Select whether to delete the last part of the data and scan it again,
delete the last part of the data and print, or delete all of the docu-
ment data.
– To cancel changes to the settings, touch [Cancel Change].
Scanning begins. After scanning is finished, select [Fix], and then touch
[OK].
Is there more information about the settings?
?
% Refer to the appropriate section.
cm4520
8
8-21