Draytek Vigor 2100 Series User Manual page 45

Active
Comment
Next Filter Set
To edit Filter Rule, click the Filter Rule index button to enter the Filter Rule setup page.
Comments
Check to enable the
Filter Rule
Pass or Block
Vigor2100 Series User's Guide
refer to the following page.
Enable or disable the filter rule.
Enter filter set comments/description. Maximum length is
23–character long
Set the link to the next filter set to be executed after the current filter
run. Do not make a loop with many filter sets.
Enter filter set comments/description. Maximum length is 14-
character long.
Check this box to enable the filter rule.
Specifies the action to be taken when packets match the rule.
Pass Immediately - Packets matching the rule will be passed
immediately.
Block Immediately - Packets matching the rule will be dropped
immediately.
Pass If No Further Match - A packet matching the rule, and that
does not match further rules, will be passed through.
Block If No Further Match - A packet matching the rule, and that
does not match further rules, will be dropped.
39