Table of Contents
Advertisement
Profile Name
Register via
SIP Port
Domain/Realm
Proxy
Act as Outbound Proxy Check this box to make the proxy acting as outbound proxy.
Display Name
Account Number/Name Enter your account name of SIP Address, e.g. every text before @.
Authentication ID
Password
Expiry Time
NAT Traversal Support If the router (e.g., broadband router) you use connects to internet by
Ring Port
Vigor2100 Series User's Guide
Assign a name for this profile for identifying. You can type similar
name with the domain. For example, if the domain name is
draytel.org, then you might set draytel-1 in this field.
If you do not want to register for VoIP phone, please choose None.
In addition, some SIP server allows users to use VoIP function
without registering. For such server, please check the box of make
call without register. Choosing Auto is recommended. The system
will select a proper way for your VoIP call.
Set the port number for sending/receiving SIP message for building
a session. The default value is 5060. Your peer must set the same
value in his/her Registrar.
Set the domain name or IP address of the SIP Registrar server.
Set domain name or IP address of SIP proxy server. By the time you
can type:port number after the domain name to specify that port as
the destination of data transmission (e.g., nat.draytel.org:5065)
The caller-ID that you want to be displayed on your friend's screen.
Check the box to invoke this function and enter the name or number
used for SIP Authorization with SIP Registrar. If this setting value is
the same as Account Name, it is not necessary for you to check the
box and set any value in this field.
The password provided to you when you registered with a SIP
service.
The time duration that your SIP Registrar server keeps your
registration record. Before the time expires, the router will send
another register request to SIP Registrar again.
other device, you have to set this function for your necessity.
None – Disable this function.
Stun – Choose this option if there is Stun server provided for your
router.
Manual – Choose this option if you want to specify an external IP
address as the NAT transversal support.
Nortel – If the soft-switch that you use supports Nortel solution, you
can choose this option.
Set VoIP 1 or VoIP 2 as the default ring port.
61
Advertisement
Table of Contents
