Station Information; Gateway Settings - Aiphone IXG Series Quick Start Programming Manual

Station Information

Identification
From the side menu, navigate to Station Information, Identification. This menu can be used to customize the
Station Number and Name for each station in the system. The Station Name and Number are typically only seen
by stations within the same Unit for internal communication, but it is recommended to give custom names to any
entrance or door stations so that users can distinguish them more easily. Once everything is configured,
click .
Update
ID / Password (Optional)
From the side menu, navigate to Station Information, ID / Password. This menu can be used to edit the the
Admin ID and Password for each station, though this is not normally recommended. This menu can also be used
to give stations an ONVIF and RTSP ID and Password, which is needed for entrance or door stations that will be
tied to an NVR.

Gateway Settings

If the system contains Mobile Apps, a Gateway (IXGW-(T)GW) will need to be added.
Gateway Registration
To add the Gateway to the system, navigate to Gateway Settings, Gateway Registration. For each Gateway,
select Enable, then optionally edit its Station Name, and review the other settings. Up to 99 Gateways can be
configured per system. Once everything is configured, click
Gateway Selection
Navigate to Gateway Settings, Gateway Selection. For each unit, choose a primary gateway that will be used
to call IXG mobile apps. An optional secondary gateway can also be designated that will be utilized if the primary
gateway goes offline. Click .
Update
.
Update
7