Diagnostics Menu; Entering Diagnostics Menu; Available Tests - Lexmark X642e Service Manual

7002-xxx

Diagnostics Menu

Entering Diagnostics Menu

1.
Turn off the printer.
2.
Press and hold 3 and 6 buttons simultaneously.
3.
Turn on the printer.
4.
Release the buttons after 10 seconds.

Available tests

The tests display on the operator panel in the order shown:
Note: Some menus are not available, depending on the configuration of the printer.
Diagnostics Menu tests
REGISTRATION
Top Margin
Bottom Margin
Left Margin
Right Margin
Quick Test
PRINT TESTS
Tray 1
Tray 2 (if installed)
Tray 3 (if installed)
Tray 4 (if installed)
Tray 5 (if installed)
MP Feeder
Envelope Feeder (if installed)
Printing Print Quality Test Pages
HARDWARE TESTS
Panel Test
Button Test
DRAM Test
CACHE Test
Parallel 1 Wrap (if installed)
(Note: This setting only appears if a
parallel port is available through the PCI
slot 1)
Serial 1 Wrap (if installed)
(Note: This setting only appears if a serial
port is available through the PCI slot 1)
3-2
Service Manual
See "Registration (printer)" on page 3-5
See "Quick Test" on page 3-6
See "Input source tests" on page 3-7
See "Printing Quality Pages" on page 3-7
See "Panel Test" on page 3-8
See "Button Test" on page 3-8
See "DRAM Test" on page 3-9
See "Parallel Wrap test" on page 3-10
See "Serial Wrap test" on page 3-10