Quick Test - Lexmark X642e Service Manual

7002-xxx
To set print registration:
1.
Print the Quick Test page.
a.
Touch REGISTRATION from the Diagnostics Menu.
b.
Touch
Retain this page to determine the changes you need to make to the margins settings. The diamonds in the
margins should touch the margins of the page.
2.
To change the value of any of the margin settings:
•
Touch
header and
•
Touch
•
Touch Submit to save the change, or Touch Back to cancel and return to the Diagnostics Menu.
•
For model X642e, touch Submit to save all changed values.
The device prints a Quick Test page from the appropriate paper tray. While the Quick Test page prints,
Printing Alignment Page appears on the LCD.

Quick Test

The Quick Test contains the following information:
•
Margin settings
•
Alignment diamonds at the top, bottom, and each side.
•
Horizontal lines for skew adjustment
•
General printer information, including current page count, installed memory, serial number, and code level.
To print the Quick Test page:
Note: Print the Quick Test Page on letter or A4 paper.
1.
Touch REGISTRATION from the Diagnostics Menu.
2.
Touch
The message Quick Test Printing... appears on the display.
Once the Quick Test Page completes printing, the Registration screen displays again.
3.
Touch Back to return to the Diagnostics Menu.
3-6
Service Manual
to select Quick Test. You may need to scroll to the next page.
to the right of the appropriate margin setting. The panel displays the setting's name in the
[setting's current value]
to decrease the value or
to select Quick Test.
in a menu below the header row.
to increase the value.