Caller Id Troubleshooting - Bell Phones 31070 Manual

•
No power on
the handset
unit
•
•
Does not charge
•
•
•
Range is
limited
•
•
•
Calls received
flutters or fades
•
Interference
on reception
•
Excessive static
B. CALLER ID SYSTEM TROUBLESHOOTING TABLE
SYMPTOM
•
The Caller ID
48
Check the Ni-Mh battery pack for proper
connection inside the battery compartment on the
handset.
The handset rechargeable Ni-Mh pack may need
charging.
Check the Ni-Mh battery pack for proper
connection inside the battery compartment on the
handset.
Make sure the charging contacts on both the base
unit and the handset are in contact during
charging.
The charging contacts and terminals may need
cleaning with an alcohol-dampened swab.
Move the base unit so that it is centrally located
in your residence or office and make sure that the
base unit is not located near appliances.
The handset Ni-Mh battery may be weak.
Recharge the Ni-Mh battery.
Refer to the section "Improving Cordless
Reception".
The handset rechargeable Ni-Mh battery pack
may need charging.
Refer to the section "Improving Cordless
Reception".
Refer to the section "Improving Cordless
Reception".
SOLUTION
Check the power connection.
061210B-1