Belt Clip Installation; Wall Use - Wall Mounting - Bell Phones 31070 Manual

Belt Clip Installation

With the back of the handset facing up, insert one side of the belt clip hook into
the matching slots at the top side of the handset as shown in Figure 2. Slide the
other hook until it locks into place from the opposite side of the handset.
WALL USE:
Wall Mounting (Standard Wall Jack)
1. Install the wall mount bracket at the position as shown in Figure 3.
2. Connect the short telephone line cord to the TEL LINE jack.
3. Connect the opposite end of the telephone line cord to the modular wall
jack.
4. Align the wall mounting slots with studs located on the modular wall plate
and slide base down to lock in place.
Wall Mount
18
Belt clip hook
(Figure 2)
Wall Mount
Stud
Telephone
Modular Jack
Wall Mount
Stud
(Figure 3)
061210B-1