Main Menu Function Programming 2 -Phonebook Setting; Saving Into The Phonebook; Telephone Keypad Character - Bell Phones 31070 Manual

6. Press [MENU/OK Button] to confirm.
7. Press [TALK OFF Button] to return to Idle Mode.

Main MENU Function Programming 2 -PHONEBOOK SETTING

SAVING in the PHONEBOOK
1. Press [MENU/OK Button].
2. Press [UP or DN Button] to select " PHONE BOOK"
3. Press [MENU/OK Button].
4. Press [UP or DN Button] to select "ADD ITEM".
5. Press [MENU/OK Button]. The LCD will show "NAME?".
6. Use [TELEPHONE KEYPAD Button] (0-9) to enter the name; (see the
"TELEPHONE KEYPAD CHARACTERS SETTING" section) you can
store up to 12 characters.
7. Press [MENU/OK Button]. The LCD will show "NUMBER?"
8. Enter the telephone number using the TELEPHONE KEYPAD button
(0-9). You can store up to 20 digits.
9. Press [MENU/OK Button]. The melody name is displayed; the ringer tone
will also be sounded. The default name to be displayed is "Melody 1". The
user can move through the melody options using [UP or DN Button].
10. Press [MENU/OK Button] to confirm.
Note: If there are no memory locations left in the phonebook, the unit
will display "PB FULL". To continue with memory programming, you
must delete or edit existing speed dial numbers. If no active buttons are
pressed for 20 seconds, the LCD Display will automatically return to idle
mode.
TELEPHONE KEYPAD CHARACTERS
The [TELEPHONE KEYPAD Buttons] (0-9) are used to enter the characters
when entering names. Press the appropriate KEYPAD button to get the
following characters.
061210B-1 31