Contrast Setting; Area Code Setting; Select Base Setting - Bell Phones 31070 Manual

CONTRAST SETTING

1. Press [MENU/OK Button].
2. Press [UP or DN Button] to select "HS SETTING".
3. Press [MENU/OK Button].
4. Press [UP or DN Button] to select "CONTRAST".
5. Press [MENU/OK Button].
6. Press [UP or DN Button] to select level 1, 2, 3.
7. Press [MENU/OK Button] to confirm.
8. Press [TALK OFF Button] to return to idle mode.

AREA CODE SETTING

This function allows user to preset an area code for CID incoming call display.
(Maximum 3 digits). This feature can hide the area code that you specify, so
when a local call is incoming, you will only see the 7 digit telephone number
without the area code, even call back the number as 7 digits in caller ID.
1. Press [MENU/OK Button].
2. Press [UP or DN Button] to select "HS SETTING".
3. Press [MENU/OK Button].
4. Press [UP or DN Button] to select "AREACODE SET".
5. Press [MENU/OK Button].
6. Use the [TELEPHONE Keypad] (0-9) to enter the AREA CODE.
7. Press [MENU/OK Button] to confirm.
8. Press [TALK OFF Button] to return to idle mode.

SELECT BASE SETTING

This function allows the user to select a base from those already registered to
the handset.
1. Press [MENU/OK Button].
2. Press [UP or DN Button] to select "HS SETTING".
3. Press [MENU/OK Button].
4. Press [UP or DN Button] to select "SELECT BS".
42 061210B-1