Table of Contents
Advertisement
PAUSE FUNCTION
•
In some cases, such as PABX or long distance service, a pause may be
needed in the dialing sequence. Pressing [PA (Pause) Button] inserts a
"pause" programmed time interval between dialed numbers.
FLASH FUNCTION
•
Press [FASH Button] to access custom calling features such as Call
Waiting or Three-Way Calling provided by your local phone company.
Press [Flash Button] during dialing or placing calls, can also be used to
restore a dial tone to make a new call.
LOW BATTERY WARNING
•
When the handset battery voltage level is low, the "BATTERY LOW" icon
will flash. When the battery is full, all cells will be shaded on the icon.
•
Return the handset on the base cradle for charging the battery.
Note: If the battery is low during a call, a warning beep will be emitted
every 10 seconds to alert the user to charge the battery.
PAGING the HANDSET
•
If you have misplaced the handset or need to alert a person near the
handset, Press [PAGE Button] on the Base unit. Each press of [PAGE
Button] will activate the handset to beep for 60 seconds. The LCD Display
shows "PAGING..." and the Base IN USE LED Indicator will start to
blink. Press [PAGE Button] again to stop.
Note: Even if the handset is in RING OFF mode, the Base unit can still
"Page" the handset.
HANDSET KEYPAD LOCK and UNLOCK
1.
Press [MENU/OK Button].
2.
Press [
Button] to LOCK keypad, repeat procedure to UNLOCK.
Or Press and hold [
Button] to LOCK keypad, repeat procedure to
UNLOCK.
24
061210B-1
Hide quick links:
Advertisement
Table of Contents
