Base Unit Controls - Bell Phones 31070 Manual

BASE UNIT CONTROLS:

Base Unit Charge Terminals - Used for charging handset batteries. We
recommend that you clean these contacts periodically with an
alcohol-moistened cloth or cotton swab.
IN USE LED Indicator / Visual Ringer LED Indicator
(IN USE LED Indicator) - LED flashes when the phone is in talk mode. LED
blinks when you have incoming call. LED flashes when paging the handset.
(Visual Ringer LED Indicator) Flashes to indicate the phone is ringing, as a
signal to the user, when the ringer is switched off.
CHARGE LED Indicator - LED Lights up steadily when the handset is being
charged on the base and turns off when the handset is removed from its cradle.
PAGE / Extra Handset Registration Button - Allows you to locate the
handset when it is not on the base. Press and hold to enter to the base
registration mode.
DC 6V Jack - A jack located on the rear side of the base unit used for
connecting the AC adaptor to the base unit.
Telephone Line Jack – Accepts the line cord for connection to the telephone
outlet.
16 061210B-1