Handset (Hs) Default Setting; Main Menu Function Programming 5 - Register; Extra Handset Registration - Bell Phones 31070 Manual

5. Press [MENU/OK Button].
6. Press [UP or DN Button] to select "BASE 1, 2, 3, 4 or AUTO".
7. Press [MENU/OK Button] to confirm.

HANDSET (HS) DEFAULT SETTING

This function allows the user to restore the Handset settings to the factory
default.
1. Press [MENU/OK Button].
2. Press [UP or DN Button] to select "HS SETTING"
3. Press [MENU/OK Button].
4. Press [UP or DN Button] to select "HS DEFAULT"
5. Press [MENU/OK Button]. The LCD will show "PIN?"
6. Press [MENU/OK Button] to confirm. The LCD will show "PB CLR?
Y/N"
7. Press [UP or DN Button] to select "YES" to clear all previous phonebook
setting.
8. Press [MENU/OK Button] to confirm.
Main MENU Function Programming 5 – REGISTER

EXTRA HANDSET REGISTRATION:

Note: Maximum of 5 handsets can be registered or linked to the same Base
Unit and Maximum of 4 Bases per handset.
You can purchase additional handsets for multi-handset use with many of this
telephone's features. Make sure the battery is connected and the base is powered
on before starting the operation.
1. Press and hold [PAGE Button] on the base unit until the Base IN USE
LED Indicator flashes.
2. Press [MENU/OK Button].
3. Press [UP or DN Button] to select "REGISTER".
061210B-1 43