INSTALLATION
CAUTION: USE ONLY THE Ni-Mh BATTERY TYPE INCLUDED
WITH THIS UNIT. USE OF OTHER BATTERY TYPES MAY CAUSE
INJURIES OR DAMAGE.
Battery Installation:
1.
Remove the battery compartment cover of the handset by pressing the top
of the cover and sliding it down.
2.
Connect the Ni-Mh battery pack plug along the slot into the handset's
battery connector as shown below.
Ni-Mh Battery
Pack
Black
Wire
3.
Insert the Ni-Mh battery into the battery compartment.
4.
Replace the battery compartment cover by sliding it up towards the
handset.
Note: Use the type and size of Ni-Mh battery pack, 2.4V, 600mAh. It is
recommended that the Ni-Mh battery pack should be fully charged
overnight prior to initial use.
061210B-1
Red
Wire
(Figure 1)
17