ZyXEL Communications ZyWALL USG 2000 User Manual page 169

Set the Device Role to Backup. Activate monitoring for the ge1 and ge2
4
interfaces. Set the Synchronization Server Address to 192.168.1.1, the Port
to 21, and the Password to "mySyncPassword". Select Auto Synchronize and
set the Interval to 60. Click Apply.
Figure 133 Configuration > Device HA > Active-Passive Mode: Backup ZyWALL
Example
Click the General tab. Turn on device HA and click Apply.
5
Figure 134 Configuration > Device HA > General: Master ZyWALL Example
ZyWALL USG 2000 User's Guide
Chapter 7 Tutorials
169