Set Up The Vpn Gateway - ZyXEL Communications ZyWALL USG 2000 User Manual

Chapter 7 Tutorials
In this example, the ZyWALL is router X (1.2.3.4), and the remote IPSec router is
router Y (2.2.2.2). Create the VPN tunnel between ZyWALL X's LAN subnet
(192.168.1.0/24) and the LAN subnet behind peer IPSec router Y (172.16.1.0/
24).

7.4.1 Set Up the VPN Gateway

The VPN gateway manages the IKE SA. You do not have to set up any other
objects before you configure the VPN gateway because this VPN tunnel does not
use any certificates or extended authentication.
Click Configuration > VPN > IPSec VPN > VPN Gateway, and then click the
1
Add icon.
Enable the VPN gateway and name it ("VPN_GW_EXAMPLE"). For My Address,
2
select Interface and ge2. For the Peer Gateway Address, select Static
Address and enter 2.2.2.2 in the Primary field. For the Authentication, Select
Pre-Shared Key and enter 12345678. Click OK.
Figure 80 Configuration > VPN > IPSec VPN > VPN Gateway > Add
128
ZyWALL USG 2000 User's Guide