ZyXEL Communications ZyWALL USG 2000 User Manual page 215

Table 21 Dashboard (continued)
LABEL
Number of
Login Users
Boot Status
Power
Module
Licensed
Service Status
#
Status
Name
Version
Expiration
Top 5 Viruses
#
Virus ID
Virus Name
Source IP
ZyWALL USG 2000 User's Guide
DESCRIPTION
This field displays the number of users currently logged in to the
ZyWALL. Click the icon to pop-open a list of the users who are currently
logged in to the ZyWALL. See
This field displays details about the ZyWALL's startup state.
OK - The ZyWALL started up successfully.
Firmware update OK - A firmware update was successful.
Problematic configuration after firmware update - The application
of the configuration failed after a firmware upgrade.
System default configuration - The ZyWALL successfully applied the
system default configuration. This occurs when the ZyWALL starts for
the first time or you intentionally reset the ZyWALL to the system default
settings.
Fallback to lastgood configuration - The ZyWALL was unable to apply
the startup-config.conf configuration file and fell back to the
lastgood.conf configuration file.
Fallback to system default configuration - The ZyWALL was unable
to apply the lastgood.conf configuration file and fell back to the system
default configuration file (system-default.conf).
Booting in progress - The ZyWALL is still applying the system
configuration.
These fields display the status of the ZyWALL's power modules PWR1
and PWR2. The ZyWALL has two power modules. It can continue
operating on a single power module if one fails.
ready - The power module is connected and working properly.
fail - Check the power module's connection or replace the module. See
Section 56.2 on page 887
This shows how many licensed services there are.
This is the current status of the license.
This identifies the licensed service.
This is the version number of the anti-virus or IDP signatures (anti-virus
and IDP).
If the service license is valid, this shows when it will expire. N/A displays
if the service license does not have a limited period of validity.
This is the entry's rank in the list of the most commonly detected
viruses.
This is the IDentification number of the anti-virus signature.
This is the name of a detected virus.
This is the source IP address of virus-infected files that the ZyWALL has
detected.
Section 9.2.6 on page
for how to change a power module.
Chapter 9 Dashboard
220.
215