Check Inverter Dimensions - Hitachi SJ300 Series Instruction Manual

2–8
Step-by-Step Basic Installation
4
Check Inverter
Dimensions
SJ300 -004LFU
SJ300 -075LFU/HFE, HFU
Step 4: Locate the applicable drawing on the following pages for your inverter.
Dimensions are given in millimeters (inches) format. Smaller models come equipped with
NEMA1 adapter (conduit box) for wire entry for U.S. models (LFU and HFU). The NEMA 1
adapter is optional for larger models as indicated in the drawings.
Model
10(0.39)
2 - φ 6(0.24)
-007LFU/HFE, HFU
-015LFU/HFE, HFU
-022LFU/HFE, HFU
-037LFU/HFE, HFU
-055LFU/HFE, HFU
6(0.24)
10(0.39)
21(0.83)
Model
10.5(0.41)
-110LFU/HFE, HFU
7(0.28)
10.5(0.41)
21(0.83)
NOTE: Be sure to use lock washers or other means to ensure screws do not loosen
due to vibration.
150(5.91)
130(5.12)
130(5.12)
3 - φ 28(1.10)
108(4.25)
Wiring hole (knockout)
143(5.63)
210(8.27)
2 - φ 7(0.28)
189(7.44)
3 - φ 44(1.73)
189(7.44)
168(6.61)
Wiring hole (knockout)
203(7.99)
Exhaust
108(4.25)
Air intake
Conduit box
Exhaust
Air intake
80(3.15)
Conduit box