Changing Configuration Settings From The Display - Intermec PB22 User Manual

PB22 and PB32 Mobile Label and Receipt Printer User Guide
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer
Options in Extended Test Mode
Function
Select Media
Test Labels
Dump Mode
Factory Default
Exit to Setup
Exit

Changing Configuration Settings from the Display

You need to enter Setup mode before you can change configuration
settings. For more information on entering Setup mode and
navigating through the settings, see
on page 21.
The top levels of the Setup menu are organized in a one-way loop.
Each level has several sub-levels.
Description
This option is almost the same as the process in Test
mode, except that the printer performs a slow test
feed in Extended Test mode. The slow test feed
enables the printer to perform a slow sensor
calibration which can help resolve mark detection
problems.
This option allows you to print test labels one at a
time. Press to print the next label.
This options enters Dump mode. For more
information on Dump mode,
Communication Problems" on page
This option restores the factory default settings. Press
to select this option and then follow the
instructions on the screen.
This option exits Extended Test mode and puts the
printer in Setup mode.
This option exits Extended Test mode.
"Understanding Setup Mode"
see
"Troubleshooting
60.
25