Understanding The Printer Language - Intermec PB22 User Manual

Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer

Understanding the Printer Language

6
There is only one LED on the printer: the Ready-to-Work™ indicator.
Understanding the Ready-to-Work Indicator
Indicator State Description
Off One of several conditions:
•
•
•
On The printer is turned on and operating.
Blinking One of several conditions:
•
•
•
Your printer comes with Intermec Printer Language (IPL),
Fingerprint, ESC/P, ZSim, and the ability to run any of the printer
languages. The language you select affects the functionality of the
printer and how you interact with it.
The printer displays the current firmware type and version in Ready
mode.
IPL 12.0.0
Printer Running IPL Firmware
The first time you turn on the printer, you select the printer language
to run on the printer. The language you select automatically runs each
time you turn on your printer.
PB22 and PB32 Mobile Label and Receipt Printer User Guide
The printer is in Standby mode.
The printer is in Info mode.
The printer is in Setup mode.
The printer is out of paper.
The media cover is open.
There is a printer error that requires you to perform an
action. For a list of possible problems, see
"Troubleshooting the Printer" on page 56.