Intermec PB22 User Manual page 20

Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer
8
To change the printer language using IPL and a communications
program
1 Connect your printer to your PC using a serial cable. For help, see
"Connecting the Printer Through the Serial Port" on page
2 Start a communications program like HyperTerminal.
3 Send the enable administrator rights command:
<STX><ESC>.y, su -p pass admin <ETX>
4 Send the run command to change the printer language:
<STX><EXC> .y,setlanguage FP -r<ETX>
To change the printer language using ESC/P and a communications
program
1 Connect your printer to your PC using a serial cable. For help, see
"Connecting the Printer Through the Serial Port" on page
2 Start a communications program like HyperTerminal.
3 Enter U-shell. Press the ESC key and type:
{SYS:USH}
4 Send the enable administrator rights command:
su -p pass admin
5 Send the run command to change the printer language:
setlanguage IPL -r
To change the printer language using the display and Fingerprint
1 Press the Setup button. The Setup menu system appears.
2 Press until you reach Print Defs.
3 Press to enter the Print Defs menu system.
4 Press until you reach CMD Language.
5 Press to enter the CMD Language menu system.
6 Press until you see the language of you want to select.
7 Press to select the printer language.
PB22 and PB32 Mobile Label and Receipt Printer User Guide
31.
31.