Understanding Error Mode; Understanding Test Mode; Using Test Mode - Intermec PB22 User Manual

Understanding Error Mode

Understanding Test Mode

PB22 and PB32 Mobile Label and Receipt Printer User Guide
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer
The printer enters Error mode when it detects an error condition such
as a low battery or a paper fault. Some error messages appear on the
screen immediately when they occur, such as DOOR OPEN. Other
error messages do not appear until you press the Information
button. If there is more than one error at a given time, the errors
display in the order that they occurred.
DOOR OPEN
Sample Error Mode Screen
If you encounter an error message, see
Messages" on page 56
Use Test mode to verify printer settings, test printing, restore factory
default settings, or enter Dump mode for troubleshooting purposes.
Two test modes are available: Test mode and Extended Test mode.

Using Test Mode

Test mode is a simple sequence of events that requires little user
interaction. Extended Test mode requires more user interaction and
lets you select which actions you want the printer to perform.
To enter Test mode
1 Make sure the printer is in Ready mode and is loaded with media.
2 Press and hold the Feed and Standby buttons at the same time
until Select Media appears on the screen and it displays the type of
media you are using.
"Understanding Error
for information on how to fix the problem.
23