Downloading Fonts And Graphics - Intermec PB22 User Manual

Downloading Fonts and Graphics

PB22 and PB32 Mobile Label and Receipt Printer User Guide
7 Type this command:
su -pass admin.
8 Type this command:
dlk -z.
The printer indicates that it is "Upgrading."
9 In the communications program window, click Transfer > Send
File. A dialog box appears.
10 In the protocol drop-down box, select Zmodem.
11 Browse to the firmware upgrade file (.bin) and select it.
Wait approximately 5 minutes for the firmware upgrade to finish.
When the upgrade is complete, the communications program
window displays the message, "kernal flashing ok." The printer
automatically reboots.
The easiest way to download fonts and graphics is to use PrintSet. You
can download PrintSet from the downloads page for the printer on
the Intermec website at www.intermec.com. Follow the procedures
in the PrintSet online help to download fonts and graphics.
For help with Fingerprint, IPL, ESC/P, or SmartSystems commands
and information, see either the
Reference Manual, the
ESC/P Programmer's Reference Manua
help. You can download these documents from the Intermec website
at www.intermec.com.
Chapter 2 — Configuring the PB22 and PB32
Intermec Fingerprint Command
Intermec Fingerprint Developer's
, or SmartSystems online
l
Guide, the
53