Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer
Understanding the Printer Sounds
Understanding the Backlight
10
The printer plays sounds when certain actions occur.
Understanding the Printer Sounds
Sound
Occurs When:
•
Power
•
•
Hardware
You open the media door, close the media door, or insert a
cable.
Button
You press any of the buttons.
•
Error
•
The screen backlight on the printer behaves the same way as a screen
saver on your PC. After a set amount of time elapses without any user
interaction, the backlight goes off. The screen backlight turns on
when:
•
the printer begins printing.
•
you press a button.
you connect the printer to external power.
•
•
you are communicating with or sending data to the printer.
Use the Setup menu to change the amount of time the backlight
turns off. Options for backlight are always off, always on, 5 seconds,
10 seconds, 20 seconds, 30 seconds, or 60 seconds.
PB22 and PB32 Mobile Label and Receipt Printer User Guide
You insert a battery in the printer.
The printer starts charging the battery.
You plug in the AC adapter.
The printer cannot feed paper or print a job because of
a hardware issue such as the media door open, a paper
jam, or there is no media.
An error occurs such as a paper jam, a print error, or the
printer is out of range.