Connect The Printer With Usb; Install The Printer On A Pc With Microsoft Windows 7 - Intermec PR2 User Manual

Connect the Printer with USB

Install the Printer on a PC with Microsoft Windows 7

PR2 and PR3 Mobile Receipt Printer User Manual
5 Select I accept the terms in the license agreement, and then click
Next twice.
6 Clear the Run Driver Wizard after unpacking drivers check box
and the Read installation instructions check box, and then click
Finish. If a User Account control dialog box appears, click Yes to
continue. By default, InterDriver extracts the installation files to
C:\Intermec\InterDriver7\ on your PC.
The printer supports USB connections to a desktop PC.
Caution: Before you connect your printer to your PC for the first
time, you must install the appropriate printer driver software on
your PC.
1 Connect your printer to your PC with a USB cable.
2 Turn on the printer.
The first time you connect your printer to your PC, Microsoft®
Windows® detects your printer. You need to install your printer.
Before you install your printer, you need to download and unpack the
printer driver software and connect your printer to your PC with USB.
Note: The first time you connect your printer to your PC, Microsoft®
Windows® detects your printer and displays a message, "Device driver
software was not successfully installed."
1 To navigate to the location of the InterDriver installation files,
click Browse. The default location is C:\Intermec\InterDriver7.
2 Click Next.
3 When the Hardware Installation window appears, click Continue
Anyway.
4 When the process is complete, click Finish.
Chapter 2 — Connect and Configure the Printer
17