Intermec PR2 User Manual page 62

Appendix B — Printer Settings
50
Wireless 802.11 Security Settings (Continued)
Setting
Client Certificate
Client Key
Server Common
Name 1
Server Common
Name 2
Validate Certificate Determines if the identity of the
PAC
Acquire PAC
Description
Sets the name of the client
certificate the printer uses to
authenticate to the network using
EAP-TLS. Maximum length is 128
characters.
Sets the private key the printer uses
for EAP-TLS. Maximum length is
128 characters. Use the
certinstall.sh script to install the
certificate correctly.
Sets the certificate name that is on
the primary authentication server. If
this value is none, then the value for
Server Common Name 2 is
used.Range is 1 to 96 characters.
Sets the certificate name that is on
the secondary authentication
server.If this value is none, then the
value for Server Common Name 1 is
used.Range is 1 to 96 characters.
authentication server is verified
using its certificate when using
EAP-TTLS, PEAP, or
EAP-TLS.Intermec recommends
that you set Validate Certificate to
Yes.
Sets the name of the Protected
Access Credential (PAC) that is used
for EAP-FAST authentication. The
printer uses this file if Acquire PAC
is on and the current installed PAC
fails to authenticate the printer to
the network.
Determines if automatic PAC file
provisioning is on for EAP-FAST
authentication.
PR2 and PR3 Mobile Receipt Printer User Manual
Default
None
None
None
None
No
eap-fast.pac
Off