Intermec PR2 User Manual page 61

PR2 and PR3 Mobile Receipt Printer User Manual
Wireless 802.11 Security Settings (Continued)
Setting
Association
Pre-Shared Key
Network Key Index Selects the active network key to use
Network Key 1,
Network Key 2,
Network Key 3,
Network Key 4
Username
Password
Anonymous Name? Sets the outer EAP user name that
Inner
Authentication
CA Certificate
Description
Specifies the security method
(depending on the security type)
used to grant access to the wireless
network:
•
Open/WEP
•
Shared/WEP
•
WPA/TKIP
•
WPA2/AES
For WPA and WPA2 security,
specifies the passphrase that allows
the radio to authenticate over the
wireless network. Range is 8 to 64
characters.
for WEP security. Range is 1 to 4.
Defines a network key that is used
for WEP security. Keys are entered in
ASCII or hexadecimal (preceded by
0x) format.
Sets the name that the printer uses
when logging in to the
network.Range is 1 to 96 characters.
Sets the password that the printer
uses when logging in to the
network. Range is 1 to 96 characters.
the printer uses for logging in to the
network. Maximum length is 96
characters.
Selects the authentication method
that is used when the EAP type is
EAP-FAST, PEAP, or TTLS.
Sets the name of the Certificate
Authority (CA) that verifies the
server certificate. This CA should be
the same one that was used to sign
the server certificate.
Appendix B — Printer Settings
Default
Open/WEP
None
None
Empty string
None
None
Anonymous
EAP/MSCHAPv2
intermec.pem
49