Connection Successful; Figure 2-10 "Alpha Keyboard" Dialog Window; Default Printer Settings; Alpha Keyboard - Intermec 6820 Technical Reference Manual

Using the Configuration Tool

Connection Successful

If the operation was successful, your 6820 Printer is now set to the default
configuration in flash memory, and you are returned to the Main Menu.

Default Printer Settings

The following settings are used when Restore Defaults to Printer is selected:
"
"
"
"
"
For other printer defaults, refer to the Printer Defaults paragraph, in the
Cross-Reference Tables section of this publication.

Alpha Keyboard

The Alpha button, on either the File Open dialog window or the File Save As
dialog window, brings up the alpha keyboard onscreen for you to enter text.

Returning the Filename to the Previous Dialog Window

After selecting all of the needed text, press the Save button to return the text to
the window where needed. Press the Cancel button to exit without saving the
text. The following confirmation message appears:
Press the OK button to return to the previous dialog window without the text
you have entered, or press Cancel to stay in the Alpha Keyboard dialog window.
2-18 6820 Printer Technical Reference
Zero Print Option:
Autofeed Configuration:
Protocol:
Parity:
Bit Rate:
"Alpha Keyboard" Dialog Window
Slash all zeros (zeros are printed with a slash)
CR (carriage return at end of line without line feed)
NPCP
N/A (for NPCP)
19.2K
Figure 2-10
SECTION 2