The following will be displayed:
COPY IN PROGRESS
Then, once the document has been scanned:
TURN OVER DOC
THEN OK
Lift the flatbed scanner flap, turn over your card then close the flap.
The following will be displayed:
COPY IN PROGRESS
Your fax machine will then print your card.
When the copy quality is no longer satisfactory, you can perform a calibration. To do so, please see the
paragraph Scanner calibration, on page 6-12.
Moreover, a high number of controls let you improve the copy quality.
Scanner settings
The
B&W RESOLUTION
ULTRA FAST
validate your choice by pressing the OK key.
The
ZOOM
the zoom value to apply to the document, 25 to 400%. Enter the zoom value required using the
keys of the digital key pad. Validate the choice with the OK key.
The ASSEMBLED parameter is used to define the choice of your printer outputs; either
assembled or not assembled. Validate the choice with the OK key.
If you wish, you can change the origin of the scanner.
S
PECIFIC COPY SETTINGS
setting to adjust the resolution for photocopying. Select the resolution:
,
, FAST
QUALITY
setting is used to reduce or enlarge part of the document by choosing the original and
5-18
841 OK - ADVANCED FCT / COPY / RESOLUTION
or
PHOTO
842 OK - ADVANCED FCT / COPY / ZOOMING
843 OK - ADVANCED FCT / COPY / ASSEMBLED
844 OK - ADVANCED FCT / COPY / ORIGIN
Operation
by means of the
or
, keys,