Operation
By entering new values of X and Y given in mm (X < 210 and Y < 286), you will move the
scanning zone as shown on the figure below.
Select the X and Y coordinates with keys
Set the required coordinates with the numeric keypad or
Confirm your setting by pressing key OK
Contrast
Set the desired contrast with keys
Confirm your setting by pressing key OK
Luminosity
Set the desired luminosity with keys
Confirm your setting by pressing key OK
Margins
If you want to shift the side margins of your document to the left or to the right:
Adjust the left / right margins shift (in steps of 0.5 mm) with keys
Confirm your setting by pressing key OK
Printer settings
Paper
Select the type of paper
Confirm your setting by pressing key OK
Remarks
:
1) When the THICK type of paper is selected, the printing speed is slowed down.
2) Use the manual feeder for paper substances over 90 g/m
Paper tray
Select the paper tray to be used (
Confirm your setting by pressing key OK
y
x
NORMAL
5-13
scanned area
Top view: scanned side down
or
or
or
or
with keys
THICK
2
.
,
or
AUTOMATIC
LOWER
or
or
or
) using keys
or
UPPER