Sagem LASER PRO 348 User Manual page 13

Installation
• Do not allow water or other liquids to spill on or near the terminal. Fire or electrical shock
can occur should water or liquid come into contact with the terminal.
• Should liquid or any piece of metal accidently get inside the printer, immediately turn it off,
unplug the power cord, and contact your dealer. Failure to take this immediate action creates
the danger of fire or electrical shock.
• Whenever the terminal emits unusually high amounts of heat, smoke, an unusual odor, or
noise, immediately turn it off, unplug it, and contact your dealer. Failure to take this imme-
diate action creates the danger of fire or electrical shock.
• Paper for printer: do not use paper previously printed by your terminal or any other
printer: the ink or toner deposited on that paper might damage the printing system of
your terminal.
Caution -
of ozone is generated during normal operation of this terminal. Because of this, an
unpleasant odor may result when the printer is used for extensive printing in a poorly
ventilated area. For a comfortable, healthy, and safe operation, be sure to locate the
terminal in a well-ventilated area.
Be sure to locate the terminal in a well-ventilated location. A minimal amount
1-3