Initialisation Parameters; Access To Connection And Message Service Parameters - Sagem LASER PRO 348 User Manual

Table of Contents

Advertisement

Access to the Internet is possible thanks to an Internet service provider (ISP). The provider puts at your
disposal a server, or computer system which allows you to connect to the Internet and your mailbox
through your telephone line.
Before worldwide transmission, you must:
• take out an Internet subscription from an Internet Service Provider (ISP),
• check that all initialisation parameters correspond to those provided by your ISP,
• perform the proper settings, if needed, for the Internet connection.
You may then connect yourself to the Internet via your ISP to send and receive fax-Internet or
E-mails. Both operations will be performed during an Internet connection.
I
You must define or, at least check all parameters needed to identify yourself with the Internet.
Your ISP will provide you with these parameters as soon as you are registered with them.
The parameters are divided in four categories:
• connection, allows you to identify the dial up number, the connection identifier and the connec-
tion password,
• message service, allows you to define the message service identifier, the message service pas-
sword and the E-Mail address,
• servers, allows you to identify the name of the OP address of Internet SMTP providers (send) and
POP3 (MBX reception) and the address of DNS 1 and DNS 2 servers. The server address is made
up of 4 groups of 3 digits maximum, separated by dots.
• SMTP Authentification, used to activate the authentification protocol when the SMTP server
used requests this to end e-mails.

Access to connection and message service parameters

Select the Internet provider from the list
PROVIDER_3
press OK.
Choosing
Enter the
Enter connection
Enter connection
Enter Email
Enter Email
1.
If the identifier has more than 16 characters, the text will automatically slide over to the left.
NITIALISATION PARAMETERS
,
,
PROVIDER_4
PROVIDER_5
disables access to Internet functions. OK.
NO ACCESS
M 921 OK - INTERNET / INIT PROVIDER / CONNECTION
, press OK.
CALL NUMB.
1
, press OK.
IDENTIFIER
, press OK.
PASSWORD
M 922 OK - INTERNET / INIT PROVIDER / MESS. SERV
press OK.
IDENTIFIER,
press OK.
PASSWORD,
3-12
Setting your machine
M 91 OK - INTERNET / SUPPLIER
,
NO ACCESS
PROVIDER_1
,
or
PROVIDER_6
LOCAL NETWORK
,
,
PROVIDER_2
, and

Advertisement

Table of Contents
loading

Table of Contents