Printing The Machine Settings; Memorizing A Sequence Of Keys - Sagem LASER PRO 348 User Manual

Operation
P
At any moment, you may print the list of your fax's parameter settings to control any changes
possibly made to the default parameters.

Printing the machine settings:

Your fax prints the list of stored parameters.
M
You may memorize a sequence of keys (for example, to send a fax directly to one or multiple
subscribers, to call this subscriber or to get access to a specific menu, etc.).
This sequence is registered in one of the keys F1 or F2 (as you want).
Then, by pressing one of these keys, you will execute the registered sequence.
Remark : By default, Scan to PC function is programmed on F1 key and Scan to FTP function is programmed on
F2 key.
To register a sequence (for example, in key F1)
Press key M, then F1: you will enter the menu option
From this moment, all the key pressings are memorized in the key F1.
Press key F1 to register the sequence if you are still in the menus. The sequence
memorizing is automatic if you have already exited the menu
Example: to memorize a fax sending to various subscribers in key F1:
Press keys M then F1
Press keys 3, 1 then OK
Enter the subscriber fax number
Press key
Repeat this last step for all subscribers or subscribers lists
Press key F1: the sequence is memorized
To send a fax directly to your subscriber (key F1 preset)
Press F1
Position the document (refer to paragraph Document positioning, page 5-1)
Press the key
RINTING THE MACHINE SETTINGS
EMORIZING A SEQUENCE OF KEYS
and enter the second subscriber fax number or subscribers list
5-15
M 54 OK - PRINT / SETUP