Remote Setting Of Parameters (Depending On The Model); Embedded Web Server; Prerequisites - Sagem LASER PRO 348 User Manual

3 S
ETTING YOUR
MACHINE
The parameters of your unit must be set properly to obtain quality transmission and reception.
You can set the parameters of your unit by browsing through the menus or remotely. The parameters
are set remotely through the embedded web server via a PC registered in the network (depending on
model).
R
EMOTE SETTING OF PARAMETERS
DING ON THE MODEL
The same parameters can be set locally or remotely.

Prerequisites

To set your unit remotely, you need:
A Web browser (Internet Explorer version 4 or higher for optimum operation),
Define the local network setting parameters of your unit (IP address, sub-network mask...). Your
network administrator will give these parameters to you. When you have this data, refer to paragraph
Local Area Network (LAN) settings (depending on model), page 3-10 in order to complete the
necessary fields
E
MBEDDED WEB SERVER
3-1
)
( -
DEPEN