Table of Contents
Advertisement
Setting your machine
The SMS service is dependent upon the country and the service provider.
Caution: There is a special scale of charges for the SMS service.
This menu is used to set several options :
• automatic SMS print on reception,
• beep activated during SMS reception,
• send your details activated,
• the address of your terminal.
The address is only modified if several terminals are installed on your line. It is used to
differentiate between two machines during SMS reception.
When you want a contact to send SMSs to the terminal you choose, you must send him your line
number and the destination terminal address.
If your contact does not add the address of the terminal, the SMS will be received in the terminal
with address 0.
Automatic print of SMS received..
Select the option WITH or WITHOUT automatic print, then validate with OK key.
Beep activated on SMS reception
Select the option WITH or WITHOUT BEEP on reception, then validate with OK key.
Presentation of SMS sender
Select the option WITH or WITHOUT presentation of the sender, then validate with OK
key.
Terminal address
Enter the terminal number, then validate with OK key.
To send an SMS to any SMS-compatible devices:
Press the
Write your SMS by means of the Qwerty keypad
SMS P
ARAMETERS
M 451 OK - SMS SERVICE / PARAMETERS / AUTO PRINT
M 452 OK - SMS SERVICE / PARAMETERS / BEEP SMS
M 453 OK - SMS SERVICE / PARAMETERS / SENDER NAME
M 454 OK - SMS SERVICE / PARAMETERS / TERM. ADDR.
S
ENDING AN
key
3-19
M 45 OK - SMS SERVICE / PARAMETERS
SMS
Advertisement
Table of Contents
